Tuxedo TLT210 Launch 10,000 lb Two Post Lift | Asymmetric
Tuxedo Launch Tech USA TLT210-XT 10,000-Lb 2 Post Lift
Multi Purpose full asymmetric lift that is height and width adjustable and may be installed in a standard or rotated column configuration to accommodate the smallest Cars to the largest SUVs’ and Trucks. This ALI/ETL Certified lift comes with a one (1) year limited warranty.
Features:
- Adjustable Column Height – Provides an extra 6″ of height adjustment for ease of installation with various ceiling heights.
- Adjustable Column Width – Provides and extra 6″ of width adjustment for narrow service bays to custom fit your shop.
- Rubber Door Guards – Provides added security against door damage.
- Outer Hose Guards – Protects hydraulic hoses from damage.
- Stackable Foot Pad Extensions – Extra tall applications are no problem with the two 6″ tall and two 3″ short extensions.
- Single Point Lock Release – Allows technicians to disengage both column locks simultaneously.
- Heavy-Duty Arm Restraint System – Oversize rugged steel gears, pins and springs for trouble free operation.
- Double Telescoping Screw Pads – Used with or without rubber pads offering 6.5″ adjustment for complete vehicle coverage.
- Standard Asymmetric – Lift installed with columns facing each other.
- Rotated Asymmetric – Lift installed with columns offset – rotated.
Specifications:
- Maximum Lifting Height:
- Standard: 76.4″ (1940mm)
- Rotated: 76.4″ (1940mm)
- Minimum Column Height:
- Standard: 143″ (3634mm)
- Rotated: 143″ (3634mm)
- Cylinder Full Height:
- Standard: 145.2″ (3688mm)
- Rotated: 145.2″ (3688mm)
- Total Width:
- Standard: 136.6″ (3470mm)
- Rotated: 137.9″ (3502mm)
- Drive-Thru Clearance
- Standard: 98.4″ (2500mm)
- Rotated: 92″ (2338mm)
- Floor to Overhead Switch:
- Standard: 140″ (3556mm)
- Rotated: 140″ (3556mm)
- Front Arm Reach (min/max)
- Standard: 23.6″ (600mm) / 43.5″ (1105mm)
- Rotated: 23.6″ (600mm) / 43.5″ (1105mm)
- Rear Arm Reach (min/max):
- Standard: 38.6″ (980mm) / 61.8″ (1570mm)
- Rotated: 38.6″ (980mm) / 61.8″ (1570mm)
- Screw Pad Height:
- Standard: 4″ (101mm) to 7.5″ (190mm)
- Rotated: 4″ (101mm) to 7.5″ (190mm)
- Inside Column Width:
- Standard: 110.2″ (2800mm)
- Rotated: 101.9″ (2588mm)
- Motor:
- Standard: 2 HP
- Rotated: 2 HP
- Voltage:
- Standard: 208-230 Volt / 60hz / Single Phase
- Rotated: 208-230 Volt / 60hz / Single Phase
- Rise Speed:
- Standard: 54 Seconds
- Rotated: 54 Seconds
- Max. Load Per Arm:
- Standard: 2500 lbs (1134 Kilos)
- Rotated: 2500 lbs (1134 Kilos)
- Min. Ceiling Height Required:
- Standard: 143.5″ (3644mm)
- Rotated: 143.5″ (3644mm)
- Narrow Bay Setting:
- Standard: Deduct 5.9″ (149mm)
- Rotated: Deduct 5.9″ (149mm)
- Maximum Column Height:
- Standard: 149″ (3874mm)
- Rotated: 149″ (3874mm)
- Capacity:
- Standard: 10,000 lbs
- Rotated: 10,000 lbs
- Ship Weight:
- Standard: 1,570 lbs
- Rotated: 1,570 lbs
- Ship Dimensions:
- Standard: 110″L x 24″W x 48″H
- Rotated: 110″L x 24″W x 48″H
PLEASE NOTE, IMPORTANT INFORMATION:
- Lift Gate CAN NOT be used to unload this item!!
